HP ProLiant SL4545 G7 Server - Manual (Page 23)

Operations 23
4. Slide the access panel toward the rear of the node, and then lift to remove the panel.
Install the access panel
1. Place the access panel on top of the node.
2. Slide the access panel forward until it clicks into place.
Remove the processor air baffle
1. Power down the node (on page 21 ).
2. Remove the node from the chassis (" Remove a node from the chassis " on page 21 ).
3. Remove the access panel (on page 22 ).
4. Remove the processor air baffle.