HP ENVY 27 27-inch Diagonal IPS LED Backlit Monitor User Manual
Hp envy 27 27-inch ips monitor
Table of contents
Document Outline
- Table of contents
- 1 Product Features
- 2 Safety and Maintenance Guidelines
- Important Safety Information
- Safety Precautions
- Maintenance Guidelines
- Cleaning the Monitor
- 1. Turn off the monitor and unplug the power cord from the back of the unit.
- 2. Dust the monitor by wiping the screen and the cabinet with a soft, clean antistatic cloth.
- 3. For more difficult cleaning situations, use a 50/50 mix of water and Isopropyl alcohol. Spray the cleaner onto a cloth and use the damp cloth to gently wipe the screen surface.
- Shipping the Monitor
- 1. Disconnect the power and video cables from the monitor.
- 2. Lay the monitor on a flat and even surface with the bottom side of the monitor extending over the edge of the surface.
- 3. Slide the base latches outwards to release the base lock.
- 4. Remove the base from the monitor.
- 5. Place the monitor and the base in the original packaging box.
- Cleaning the Monitor
- 3 Setting Up the Monitor
- 3 Setting Up the Monitor
- Unpacking the Monitor
- Installing the Base Stand
- Connecting Video Source Cables
- Connecting Audio Output Devices
- Managing the Cables
- Connecting the Power Cord
- High-Bandwidth Digital Content Protection (HDCP)
- HP Watermark and Image Retention Policy
- Selecting Video Input Connectors
- Activating Beats Audio
- Adjusting the Tilt
- 4 Operating the Monitor
- Documentation and Software CD
- Installing Drivers
- Installing the monitor driver software from the CD
- 1. Insert the CD in your computer CD drive. The CD menu appears.
- 2. Select the language.
- 3. Click Install Monitor Driver Software.
- 4. Follow the on-screen instructions.
- 5. Ensure that the proper resolutions and refresh rates appear in the Display Control Panel settings. For more information, see the Windows® operating system documentation.
- Downloading updated drivers from the Internet
- 1. Go to the HP Technical Support website at http://www.hp.com/support.
- 2. Select your country/region.
- 3. Select Support & Drivers.
- 4. Enter the model number of your monitor. The software download pages for your monitor appear.
- 5. Download and install the driver and software files by following the instructions on the download pages.
- 6. Ensure that your system meets the requirements.
- Installing the monitor driver software from the CD
- Installing Drivers
- Control Buttons
- Using the On-Screen Display (OSD)
- 1. Make sure the monitor is on.
- 2. To access the OSD menu, press the Menu button. The OSD Main Menu appears.
- 3. To navigate through the Main or sub-menu, press the (Plus) button to scroll up, or the (Minus) button to scroll in reverse. The press the OK button to select the highlighted function.
- 4. To adjust the scale of a selected item, press the or button.
- 5. Select Save and Return. If you do not want to save the setting, select Cancel from the sub-menu or Exit from the Main Menu.
- OSD Menu Selections
- Using the On-Screen Display (OSD)
- Documentation and Software CD
- Identifying Monitor Conditions
- Power-Saver Feature
- A Troubleshooting
- B Technical Specifications
- C Agency Regulatory Notices