HP ProBook 430 G1 Notebook PC - Manual (Page 63)

Installing a hard drive
To install the hard drive:
1. Angle the hard drive into the hard drive bay while inserting the alignment tabs (1) on the edge of
the hard drive with the notches on the computer.
2. Lower the hard drive (2) at an angle into the hard drive bay.
3. Pull the hard drive tab (3) toward the center of the computer until the hard drive is seated.
4. Angle the hard drive retaining plate into the hard drive bay while inserting the alignment tabs (1)
on the edge of the hard drive with the notches on the computer.
Using hard drives 53