Muting speaker sound, Decreasing speaker sound, Increasing speaker sound – HP Mini 5102 User Manual

Page 86: Configuring the function key operation, Using the touch screen (select models only), Tapping (or clicking)

Muting speaker sound

Press

to mute speaker sound. Press the key again to restore speaker sound.

Decreasing speaker sound

Press

f10

to decrease speaker sound. Hold down the key to decrease speaker sound incrementally.

Increasing speaker sound

Press

f11

to increase speaker sound. Hold down the key to increase speaker sound incrementally.

Configuring the function key operation

To configure the function key operation to require the use of the

key (

+ function key), follow these

steps:

Open Computer Setup by turning on or restarting the computer, and then pressing

esc

while the

"Press the ESC key for Startup Menu" message is displayed in the lower-left corner of the screen.

Press

f10

to enter BIOS Setup.

Select the System Configuration menu.

Select the Device Configurations menu.

Select Fn Key Switch, and then select Enable.

Press

f10

to accept the changes you have made.

To save your preferences and exit Computer Setup, use the arrow keys to select File > Save
changes and exit. Then follow the instructions on the screen.

Your preferences go into effect when the computer restarts.

Using the touch screen (select models only)

Some computer models allow you to use your fingers to perform certain actions on the touch screen.

NOTE:

The instructions in this section are based on factory settings.

NOTE:

All movements may not be supported in all programs.

Tapping (or clicking)

Tap or double-tap an item on the screen as you would click or double-click using a TouchPad or an
external mouse. Tap and hold an item to see the context menu as you would use the right TouchPad
button.

NOTE:

You must tap and hold your finger until a circle appears around the area you are touching, and

then the context menu is displayed.

Chapter 8 Pointing devices and keyboard