HP Mini 5102 - Manual (Page 119)

File menu
Select To do this
System information ● View identification information for the computer and the
batteries in the system.
● View specification information for the processor, cache
and memory size, system ROM, video revision, and
keyboard controller version.
Set system date and time Set or change the date and time on the computer.
● Set date: MM:DD:YYYY
● Set time: HH:MM
System Diagnostics ● F1: System information
● F2: Start-up test
● F3: Run-in test
● F4: Hard disk test
Restore Defaults Replace the configuration settings in Computer Setup with the
original factory settings. (Hard drive mode, password settings,
and security settings are not changed when you restore the
factory settings.)
Reset BIOS security to factory default Restore the BIOS security settings to the factory default.
Ignore changes and exit Cancel any changes entered during the current session. Then
exit and restart the computer.
Save changes and exit Save any changes entered during the current session. Then
exit and restart the computer. Your changes go into effect when
the computer restarts.
Security menu
NOTE: Some of the menu items listed in this section may not be supported by your computer.
Select To do this
Administrator Tools
Setup BIOS administrator password Enter, change, or delete a BIOS administrator password.
User Management (requires a BIOS administrator password)
Create New BIOS User Account password ● Select from a list of BIOS users.
● Select from a list of ProtectTools users.
Password Policy (requires a BIOS administrator password) Revise password policy criteria.
HP SpareKey Enable/disable HP SpareKey (enabled by default).
Always Prompt for HP SpareKey Enrollment Enable/disable HP SpareKey enrollment (enabled by default).
User Tools
Change Password Enter, change, or delete a BIOS administrator password.
Computer Setup menus 109