HP LaserJet P2015 - Manual (Page 34)

Load media
The following sections describe how to load media into the different input trays.
CAUTION If you try to print on media that is wrinkled, folded, or damaged in any way, a jam
might occur. See Clearing jams for more information.
Tray 1
Tray 1 is accessed from the front of the printer. The printer prints from tray 1 before attempting to print
from other trays.
Tray 1 holds up to fifty sheets of 75 g/m 2 (20 lb) media or ten envelopes, ten transparencies, or ten
cards. You can use tray 1 to print the first page on media different from the remainder of the document.
Media guides ensure that the media is correctly fed into the printer and that the print is not skewed
(crooked on the media). When loading media, adjust the media guides to match the width of the media
that you are using.
Tray 2 and optional tray 3
Tray 2 and optional tray 3 hold up to 250 pages of 75 g/m 2 (20 lb) paper, or fewer pages of heavier
media (25 mm (0.9 in) or less stack height). Load media with the top forward and the side to be printed
on facing down.
24 Chapter 5 Print tasks ENWW