HP LaserJet P2015 - Manual (Page 61)

Paper handling
Use the HP ToolboxFX paper-handling options to configure your default settings.
Three options are available for handling print jobs when the product is out of media:
● Select Wait For Paper To Be Loaded.
● Select Cancel from the Paper out action drop-down list to cancel the print job.
● Select override from the Paper out time drop-down list to send the print job to another paper tray.
The Paper out time field specifies how long the printer waits before acting on your selections. You can
specify from 0 to 3600 seconds.
NOTE You must click Apply to save your changes.
Print quality
Use the HP ToolboxFX print-quality options to improve the appearance of your print jobs.
● Resolution. Select 600 resolution for quality print jobs and Fast Res 1200 for higher-quality print
jobs. Select ProRes 1200 for the highest-quality print job (printing time increases).
● REt. Activate REt to improve print quality.
● Print density. For increased print density, select a higher number. For decreased print density,
select a lower number.
● EconoMode. EconoMode is a feature that allows the printer to use less toner per page. Selecting
this option may extend the life of the print cartridge and reduce your cost per page. However, it will
also reduce print quality. The printed image is lighter, but it is adequate for printing drafts or proofs.
HP does not recommend full-time use of EconoMode. See
EconoMode for more information.
NOTE You must click Apply to save your changes.
Paper types
Use these HP ToolboxFX Paper types options to configure print modes that correspond to the various
media types. When you select RESTORE MODES, all of the modes are reset to the factory settings.
NOTE You must click Apply to save your changes.
ENWW HP ToolboxFX 51