HP LaserJet P2015 User Manual
Page 22
2.
Connect the Ethernet cable to the Ethernet port on the back of the printer.
3.
Verify that one of the network lights (10 or 100) is illuminated on the network port located on the
back of the printer.
4.
Print a Network Configuration page: When the printer is in the Ready state, press and hold the
Go
button for 5 seconds. The Network Configuration page automatically prints with the
Configuration page.
NOTE
To resolve network connection problems, see
.
Install the printer software for the network printer
To use the printer on the network, install the printer software on a computer that is connected to the
network. See
Software for Windows
or
for information about installing the printer
software.
12
Chapter 3 Product software
ENWW
This manual is related to the following products: