Clearing jams, Print-cartridge area – HP LaserJet P2015 User Manual
Page 107
Clearing jams
Occasionally, media becomes jammed during a print job. You are notified of a media jam by an error in
the software and the printer control panel lights. See
for more information.
The following are some of the causes of media jams:
●
The input trays are loaded improperly or too full. See
for more information.
NOTE
When you add new media, always remove all of the media from the input tray and
straighten the stack of new media. This helps prevent multiple sheets of media from feeding
through the printer at one time, reducing media jams.
●
The media does not meet HP specifications. See
Supported paper and other media
for more
information.
●
The printer might need to be cleaned to remove paper dust and other particles from the paper path.
See
for instructions.
There might be loose toner in the printer after a media jam. This toner clears up after a few sheets print.
CAUTION
Media jams might result in loose toner on the page. If you get any toner on your
clothes, wash them in cold water. Hot water will permanently set the toner into the fabric.
Print-cartridge area
To clear a jam in the print-cartridge area, perform the following steps:
CAUTION
Do not use sharp objects, such as tweezers or needlenose pliers, to remove jams.
Damage caused by sharp objects will not be covered by the warranty.
1.
Press the print-cartridge-door button, and then remove the print cartridge from the printer.
CAUTION
To prevent damage to the print cartridge, minimize its exposure to direct light.
ENWW
Clearing jams
97