HP XP P9500 Storage - Manual (Page 37)

NOTE: The QUERY CU command may only be executed on the OS that is used directly by the
host computer. Any attempt to execute the QUERY CU command on the z/VM that is operated as
a guest OS on the other z/VM is rejected.
QUERY DASD DETAILS command
The QUERY DASD DETAILS command displays information about DASD (RDEV). Use the following
syntax for this command.
Query DAsd DETAILS {rdev | rdev1 | rdev2}
The following figure shows a sample output of this command.
CAUTION: The QUERY DASD DETAILS command cannot be used for a 3380 DASD.
QUERY PAV command
The QUERY PAV command displays the list of Parallel Access Volumes or Hyper Parallel Access
Volumes devices (including information on those devices) that are managed by the corresponding
storage system. Use the following syntax for this command.
Query PAV {rdev | rdev1 | rdev2 | ALL}
The following figure shows a sample output of this command.
QUERY DASD DETAILS command 37