HP XP P9500 Storage - Manual (Page 17)

9. Select the OS to connect or disconnect devices and press Enter to display the select / disconnect
screen.
10. Select option 1 and press Enter to display the Define Device Parameters / Features screen.
11. Specify or revise any values. The DYNAMIC parameter controls whether Parallel Access
Volumes is in dynamic or static mode. The WLMPAV parameter controls whether or not the
device is supported by Workload Manager (WLM). These parameters are set to Yes by default.
Finding a device eligible for dynamic Parallel Access Volumes management
The Hardware Configuration Definition (HCD) program is used to view configuration parameters.
This information is useful for determining if a specific device is eligible for dynamic Parallel Access
Volumes management by WLM.
Finding a device eligible for dynamic Parallel Access Volumes management 17