HP Pro Tablet 610 G1 PC - Manual (Page 32)

● Check the connection from the AC adapter to the tablet and the connection from the AC
adapter to the AC outlet to be sure that the connections are secure.
● If the connections are secure and the tablet remains off, the AC adapter is not functioning
and should be replaced.
Contact support for information about obtaining a replacement AC power adapter.
Shutting down (turning off) the tablet
CAUTION: Unsaved information is lost when the tablet shuts down. Be sure to save your work
before shutting down the tablet.
The Shut down command closes all open programs, including the operating system, and then turns
off the display and tablet.
Shut down the tablet under any of the following conditions:
● When you are connecting an external hardware device that does not connect to a USB or video
port
● When the tablet will be unused and disconnected from external power for an extended period
Although you can turn off the tablet with the power button, the recommended procedure is to use the
Windows Shut down command:
NOTE: If the tablet is in the Sleep state or in Hibernation, you must first exit Sleep or Hibernation
before shutdown is possible by briefly pressing the power button.
1. Save your work and close all open programs.
2. Swipe from the right edge, tap Settings, tap the Power icon, and then tap Shut down.
If the tablet is unresponsive and you are unable to use the preceding shutdown procedures, try the
following emergency procedures in the sequence provided:
● Press and hold the power button for at least 10 seconds.
● Disconnect the tablet from external power.
24 Chapter 6 Managing power