HP OmniBook 5500 Notebook PC - Manual (Page 12)

Using OmniBook Accessories
Installing and Removing Accessories
1-12
To insert and remove a CD
When the OmniBook is reading data from the CD-ROM drive, the CD disk indicator
appears on the Status Panel (above the function keys).
C A U T I O N Do not insert or remove a CD while the OmniBook is actively reading data.
Wait until the CD-ROM stops reading. Otherwise, the OmniBook could stop
responding and you could lose data.
1. Press the open button on the front of the CD-ROM drive.
2. Place the CD in the drive and gently press down to seat it on the spindle.
3. Close the door to the drive.
4. To remove the CD, press the open button on the front of the CD-ROM drive.
CD disk indicator
Label up