HP Scanjet Enterprise 9000 Sheet-feed Scanner - Manual (Page 12)

5. Gently set the stack in the document feeder. Load the pages face down with the top
of the pages pointing into the feeder.
For best results, do not drop the stack into the feeder and do not tap the top edge of
the stack after you have placed it in the document feeder.
1 If the document's longest edge is greater than 300 mm (11.8 in), load the
document short edge first.
2 and 3 If the document's longest edge is less than 300 mm (11.8 in), load the
document either long edge first (2) or short-edge first (3).
TIP: Many documents scan faster if the longer edge is inserted first into the
document feeder. However, you should avoid feeding a document with a leading
edge that has been folded or frayed. When you begin scanning, select a profile
whose page loading selection matches the edge you are feeding first to ensure
that the scan reflects the orientation of the original document.
6. Verify that the paper guides are aligned with the edges of the stack.
Chapter 2
10 Use the scanner