Acer WT 300 - Manual (Page 33)

25
Citrix ICA Client
The following procedure describes how to create a network
connection to a Citrix server.
Creating a Network Connection
1. In the Connection Manager dialog box click the Configure
tab and then click “Add”.
2. In the New Connection dialog box, click Citrix ICA Client in
the type of connection list. Click “OK”.
3. In the Specify Connection Type dialog box, click “Network
Connection”. Make sure your client device is connected to
the network through a NIC or by a serial PPP connection to
a Windows 95 or Windows NT RAS server. Click "Next" to
continue.
Wbt.book Page 25 Monday, August 2, 1999 4:07 PM