Turning off your system – Acer WT 300 User Manual
Page 22
Chapter 1
Getting Started
14
Turning Off Your System
1.
Log off from the server and then turn off the power of the
system.
2.
Turn off all peripherals connected to the system such as
the monitor, printer, etc.
3.
Turn off the main power switch and unplug the system if
you are going to do any of the following
■
not use the system for a long period of time
■
install system component(s)
Note: If your system is equipped with a SmartCard, remove the SmartCard first
before turning off the system.
Warning! Installing components without unplugging the system may result in
serious damage both to the system and the component. Unplugging the
system ensures that there is no standby current on the system board. Not
doing so may damage your system.
Wbt.book Page 14 Monday, August 2, 1999 4:07 PM