HP Deskjet 6122 Color Inkjet Printer - Manual (Page 79)

1. black cartridge 2. color cartridge 3. ink nozzles 4. copper contacts 5.
plastic tape
Caution! Do not touch the print cartridge ink nozzles or copper
contacts. Touching these parts will result in clogs, ink failure, and bad
electrical connections. Do not remove the copper strips. They are
required electrical contacts.
1. copper contacts
6. Push the print cartridge firmly into the cradle.
7. Secure the cradle latch.
8. Close the top cover.
A calibration page prints to align the print cartridges.
Caution! If you are in the middle of printing, and you change a print
cartridge, your current print job may be cancelled.
If the Print Cartridge Status light continues to blink after installing a new print cartridge,
verify the part number on the cartridge matches one of the part numbers shown here .
5. Remove the replacement print cartridge from its packaging and carefully remove
the plastic tape.
For information on how to recycle an empty print cartridge, see print cartridge recovery .