HP Smart Array E200 Controller - Manual (Page 5)

Hardware features 5
Hardware features
In this section
Board components ................................................................................................................................... 5
Controller specifications ............................................................................................................................ 5
Board components
Item ID Description
1 Runtime LEDs. To interpret the illumination pattern of these LEDs,
refer to "Controller board runtime LEDs (on page
30 )".
2 SAS port 2I (internal), 4x wide.
3 SAS port 1I (internal), 4x wide.
4 Cache module (also known as array accelerator). To enable RAID
migration, stripe size migration, array expansion, or logical drive
capacity extension, upgrade the cache ("
Upgrading the cache " on
page 20 ).
Controller specifications
Feature Details
Card type Full-size PCIe
Dimensions (excluding bracket) 31.2 cm × 11.1 cm × 1.5 cm (12.3 in × 4.4 in × 0.6 in)
Maximum power required Approximately 8 W