Avenview RTERM Series - Manual (Page 18)

www.avenview.com 18
2.3.2 Saving and Exiting SETUP
The first menu seen when entering SETUP mode serves as a directory to the other SETUP menus. When you
depress F12 to exit Setup, you will return to this main directory and be given the option of saving your
selections.
The highlighted field at the right of the screen gives you the choice of saving or not saving parameter changes
in the nonvolatile memory before returning the terminal to the normal operating mode. If you don’t save
your setting before you leave the SETUP mode, any new selections will be lost when you power down the
console terminal drawer.
To save your SETUP selection, depress the Spacebar to change the save field at the right side of the screen
from NO to YES before exiting SETUP.
Depress F12 to exit SETUP mode and return to the normal display mode.