HP LaserJet Pro 400 color Printer M451 series - Manual (Page 30)

System Setup menu
In the following table, items that have asterisks (*) indicate the factory default setting.
Menu item Sub-menu item Sub-menu item Sub-menu item Description
Language Select the language for the control panel
display messages and the product reports.
Paper Setup Def. Paper Size Letter
A4
Legal
Select the size for printing internal reports or
any print job that does not specify a size.
Def. Paper Type A list of available
paper types
appears. Select the paper type for printing internal
reports or any print job that does not specify a
type.
Tray 1 Paper Type
Paper Size
Select the default size and type for Tray 1 from
the list of available sizes and types.
Tray 2 Paper Type
Paper Size
Select the default size and type for Tray 2 from
the list of available sizes and types.
Paper Out Action Wait Forever*
Cancel
Override
Select how the product should react when a
print job requires a size or type that is not
available or when a specified tray is empty.
Select the Wait Forever option to make the
product wait until you load the correct paper
and press the
OK button. This is the default
setting.
Select the Override option to print on a different
size or type after a specified delay.
Select the Cancel option to automatically
cancel the print job after a specified delay.
If you select either the Override or Cancel
options, the control panel prompts you to
specify the number of seconds to delay. Use
the arrow buttons to increase or decrease the
time.
Print Quality Calibrate Color After Power On
Calibrate Now
After Power On: Select how soon the product
should calibrate after you turn it on. The default
setting is 15 Minutes.
Calibrate Now: Makes the product perform a
calibration immediately. If a job is processing,
the product calibrates after the job is complete.
If an error message displays, you must clear the
error first.
12 Chapter 2 Control panel menus ENWW