HP LaserJet 1015 Printer - Manual (Page 84)

76 Chapter 6 ENWW
Changing the printer separation pad
Note Before you change the separation pad, clean the pickup roller. See Cleaning the pickup roller for
instructions.
If your input tray feeds more than one page at a time, you might need to change the printer
separation pad. Recurring feed problems indicate that the printer separation pad is worn. See
Ordering supplies to order a new printer separation pad.
1 Unplug the power cord from the printer, and allow the printer to cool.
2 At the back of the printer, unscrew the two screws holding the separation pad in place.
3 Remove the separation pad.