Specifications, Utp cable specifications – HP NC380T PCI-E Dual Port Multifunction Gigabit Server Adapter User Manual
Page 11
Specifications 11
Specifications
In this section
UTP cable specifications.......................................................................................................................... 11
RJ-45 pinouts and crossover function ........................................................................................................ 12
HP NC380T PCI Express Dual Port Multifunction
Gigabit Server Adapter specifications
Specification Value
Network Controller Chipsets
Broadcom 5706C
Bus Type
PCI Express
Bus Width
Four lanes
Bus Speed
2.5 GHz
Data Transfer Method
Bus Master DMA
Power Requirement
Operating Voltage: +12V +/-8%
Power Consumption: 12.6 Watts
Maximum: 1.05A @ 12V (DC)
Standards Supported
IEEE 802.3ab, 802.3ad, 802.3u, 802.3x, 802.3, 802.1p, 802.1q
Dimensions
18.9 cm x 11.1 cm (without bracket) (7.44 x 4.37 inches (L x W))
Connector and Distances
Two RJ-45 Connectors, Cable and lengths as follows:
10BASE-T: Category 3, 4, or 5 UTP 100 Meters (328 feet)
100BASE-TX: Category 5 UTP 100 Meters (328 feet)
1000BASE-TX: Category 5 UTP 100 Meters (328 feet)
Interrupts Supported
Automatically configured
Temperature Range
Operating: 0°C to 55°C (32°F to 131°F)
Storage: -40°C to 85°C (-40°F to 185°F)
Relative Humidity (non-condensing) Operating: 10% to 90%
Storage: 5% to 95%
Safety Compliance
CSA Mark (US and Canada)
CE Mark
EN 60590
UTP cable specifications
To connect to the network, the NC380T uses the following cable for 1000Base-T transmission: