Asus P4C800-E - Manual (Page 96)

4-28 Chapter 4: BIOS Setup
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Power Management/APM [Enabled]
Video Power Down Mode [Suspend]
Hard Disk Power Down Mode [Suspend]
Suspend Time Out [Disabled]
Throttle Slow Clock Ratio [50%]
System Thermal [Disabled]
Power Button Mode [On/Off]
Restore on AC Power Loss [Power Off]
Power On By RTC Alarm [Disabled]
Power On By External Modem [Disabled]
Power On By PCI Devices [Disabled]
Power On By PS/2 Keyboard [Disabled]
Power On By PS/2 Mouse [Disabled]
APM Configuration
Enabled or disable
APM.
4.5.6 APM Configuration
Power Management/APM [Enabled]
Allows you to enable or disable the Advanced Power Management (APM)
feature. Configuration options: [Disbaled] [Enabled]
Video Power Down Mode [Suspend]
Allows you to select the video power down mode. Configuration options:
[Disabled] [Standby] [Suspend]
Hard Disk Power Down Mode [Suspend]
Allows you to select the hard disk power down mode. Configuration
options: [Disabled] [Standby] [Suspend]
Suspend Time Out [Disabled]
Allows you to select the specified time at which the system goes on
suspend. Configuration options: [Disabled] [1-2 Min] [2-3 Min] [4-5 Min]
[8-9 Min] [10 Min] [20 Min] [30 Min] [40 Min] [50 Min] [60 Min]
Throttle Slow Clock Ratio [50%]
Allows you to select the duty cycle in throttle mode. Configuration options:
[87.5%] [75.0%] [62.5%] [50%] [37.5%] [25%] [12.5%]
System Thermal [Disabled]
Allows you to enable or disable the system thermal feature to generate a
power management event. Configuration options: [Disabled] [Enabled]