Asus P4C800-E - Manual (Page 51)

ASUS P4C800-E Deluxe motherboard user guide 2-25
4. Serial ATA RAID connectors (7-pin SATA_RAID1, SATA_RAID2)
(on RAID models only)
These Serial ATA connectors support SATA hard disks that you may
configure as a RAID set. Through the onboard Promise
® PDC20378
RAID controller, you may create a RAID0, RAID1, RAID0+1, or multi-
RAID configuration together with the RAID ATA133 connector. See
Chapter 5 for details on RAID configuration.
1. If you wish to create a RAID set, make sure that you have
connected the SATA cable and installed Serial ATA devices. You
cannot enter the SATARaid™ utility and SATA BIOS setup during
POST if there are no connected Serial ATA devices.
2. The Promise PDC20376 RAID controller does not support ATAPI
devices such as CD-ROMs, DVD-ROMs, etc.
P4C800-E
®
P4C800-E SATA RAID Connectors
GND
RSA
T A_TXP2
RSA
T A
_TXN2
GND
RSA
T
A_RXP2
RSA
T A
_RXN2
GND
SATA_RAID1
GND
RSA
T A_TXP1
RSA
T
A_TXN1
GND
RSA
T A_RXP1
RSA
T
A_RXN1
GND
SATA_RAID2