4 onboard devices configuration – Asus P4C800-E User Manual
Page 88
4-20
Chapter 4: BIOS Setup
4.4.4 Onboard Devices Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
OnBoard AC’97 Audio [Auto]
OnBoard Promise Controller [Enabled]
Operating Mode [RAID]
OnBoard IEEE 1394 Controller [Enabled]
OnBoard LAN [Enabled]
OnBoard LAN Boot ROM [Disabled]
Serial Port1 Address [3F8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
Parallel Port Address [378]
Parallel Port Mode [Normal]
EPP Version [1.9]
ECP Mode DMA Channel [DMA3]
Parallel Port IRQ [IRQ7]
OnBoard Game/MIDI Port [Disabled]
OnBoard AC’97 Audio [Auto]
[Auto] allows the BIOS to detect whether you are using any audio device.
If an audio device is detected, the onboard audio controller is enabled; if
no audio device is detected, the controller is disabled. Configuration
options: [Disabled] [Auto]
OnBoard Promise Controller [Enabled]
Allows you to enable or disable the onboard RAID controller. Configuration
options: [Disabled] [Enabled]
Operating Mode [RAID]
Allows you to set the Promise RAID controller operating mode. This
item appears only when the item Onboard Promise Controller is set
to Enabled. Configuration options: [RAID] [IDE]
OnBoard IEEE 1394 Controller [Enabled]
Allows you to enable or disable the onboard IEEE 1394 controller.
Configuration options: [Disabled] [Enabled]
OnBoard LAN [Enabled]
Allows you to enable or disable the onboard LAN controller. Configuration
options: [Disabled] [Enabled]
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the option ROM in the onboard LAN
controller. This item appears only when the Onboard LAN item is set to
Enabled. Configuration options: [Disabled] [Enabled]