Asus P4C800-E - Manual (Page 16)

1-2 Chapter 1: Product introduction
1.3.1 Product highlights
Latest processor technology
The motherboard supports the latest Intel ® Pentium ® 4 Processor via a
478-pin surface mount ZIF socket. The Pentium 4 processor with 512KB L2
cache includes a 800/533/400 MHz system bus and features the Intel
Hyper-Threading Technology and new power design that allow up to
3.2+GHz core frequencies. See page 2-4 for more information.
The motherboard will also support the next generation Intel Prescott CPU
when available.
Dual-channel DDR400 memory support
Employing the dual-channel DDR memory architecture, the motherboard
provides a solution that doubles the system memory bandwidth to boost
system performance. The motherboard supports up to 4GB of system
memory using PC3200/2700/2100 ECC or non-ECC DDR DIMMs to
deliver up to 6.4GB/s data transfer rate for the latest 3D graphics,
multimedia, and Internet applications. See page 2-10.
Intel Performance Acceleration Technology (PAT)
Incorporating the Intel PAT, which is a turbo mode enabled in the Intel
875P to work with DDR 400 memory and boost system performance, the
motherboard delivers a new level of performance to beat.
Serial ATA technology
The motherboard supports the new Serial ATA technology through the
SATA interfaces and the Intel ICH5R onboard, and allows RAID 0
configuration. The SATA specification allows for thinner, more flexible
cables with lower pin count, reduced voltage requirement, and up to
150MB/s data transfer rate. See page 2-23.
Multi-RAID solution
The motherboard has the Promise ® PDC20378 controller to support multi-
RAID solution using Serial ATA/150 and Ultra ATA/133 hard disks. The
RAID0 (striping), RAID1 (mirroring), and RAID 0+1 provide a cost-effective
high-performance solution for added system performance and reliability.
1.3 Special features