HP 3PAR Service Processors - Manual (Page 23)

8 SPmaint
Overview
The SPmaint module provides access to utilities used for Service Processor maintenance. The SPmaint
utility is the primary interface for the support (configuration, maintenance, and firmware update)
of both the system and its SP.
SP Control/Status
By clicking the links on this menu, you can perform the following operations:
•
Display the SP version
•
Reboot the SP
•
Halt the SP
•
Start or stop storage system-related SP processes
•
View the SP File Transfer Monitor
•
Trigger an SP log transfer
•
Reset the QUIESCE state for the transfer process
•
Mount or unmount a CDROM
•
Set the date, time, and geographical location for the SP
•
Manage NTP configuration
•
Display the SP status
•
Configure user access, including adding or changing a password, modifying a user profile,
and adding or deleting a user
•
Modify the SP process control parameters
•
Update the SP software
•
Perform file maintenance (backup) operations
•
Perform cleanup operations, including removing old files and running an SP core dump check
•
Run a health check on the SP
The following sections describe how to perform some common operations in SPOCC.
Changing the SP Password
1. In the left navigation pane, click SPmaint.
2. Under Service Processor - SP Maintenance, click SP Control/Status.
3. Under Service Processor - SP Control Menu, click SP User Access Control.
4. Under Service Processor - SP User Access Control Menu, click Change User Password.
5. In the Select User list, select the user name whose password you want to change.
6. In the New Password field, enter the new password.
7. In the Confirm Password field, enter the new password again.
8. Click Change Password.
Adding a User to a User Profile Group
1. In the left navigation pane, click SPmaint.
2. Under Service Processor - SP Maintenance, click SP Control/Status.
3. Under Service Processor - SP Control Menu, click SP User Access Control.
SP Control/Status 23