HP ProLiant XL220a Gen8 v2-Server - Manual (Page 32)

Hardware options installation 32
FBWC cache module and capacitor pack option
To install the component:
1. Power down the server (on page 12 ).
2. Disconnect all peripheral cables from the server.
3. Remove the server (on page 13 ).
4. Remove the PCI riser board assembly (on page 14 ).
5. Connect the FBWC capacitor pack cable to the cache module.
6. Install the cache module in the cache module slot on the controller.
7. If using a storage controller, install the controller into the PCI riser board assembly (" Controller options "
on page 31 ).
8. Install the PCI riser board assembly (on page 17 ).