beautypg.com

Remove the drive cage assembly – HP ProLiant XL220a Gen8 v2-Server User Manual

Page 15

background image

Operations 15

6.

Remove the PCI riser board assembly. A T-10 screwdriver (for horizontal screws) and a T-15
screwdriver (for vertical screws) are required for this procedure.

Remove the drive cage assembly

1.

Back up all server data on the drive.

2.

Power down the server (on page

12

).

3.

Disconnect all peripheral cables from the server.

4.

Remove the server (on page

13

).

5.

Place the server on a flat, level work surface.

6.

Remove the PCI riser board assembly (on page

14

).

7.

Disconnect all cables from the drive cage backplane.

This manual is related to the following products:
See also other documents in the category HP Computer hardware: