HP LaserJet Pro CP1025nw Color Printer - Manual (Page 104)

9. Close the print cartridge door.
NOTE: After closing the print cartridge door,
the Ready light and Attention light will
flash. Allow up to three minutes for the product
to calibrate.
NOTE: If replacing another print cartridge,
you must close the print cartridge door before
pressing the Cartridge button of the next
print cartridge.
You do not need to wait for the product to
calibrate when replacing the second print
cartridge. Instead, press the Cartridge
button for the next color to rotate the carousel
into position. After you have replaced the print
cartridges, the product calibrates.
NOTE: After every other black cartridge
change, a cleaning page prints automatically
to clean the fuser. This cleaning page process
takes two minutes to complete.
10. When printing, if you receive the status alert
message Wrong Cartridge in
Slot, remove the print cartridge from the
specified slot and compare the color label on
the print cartridge to the color label in the slot
to determine the correct print cartridge for the
slot.
92 Chapter 8 Manage and maintain the product ENWW