HP Deskjet D4160 Printer - Manual (Page 67)

Maintenance tips
● Keep all print cartridges in their sealed packages until they are needed. Print
cartridges should be stored at room temperatures (15° to 35° C or 59° to 95° F).
● Do not remove the plastic tape covering the ink nozzles until you are ready to install
the print cartridge in the printer. If the plastic tape has been removed from the print
cartridge, do not attempt to reattach it. Reattaching the tape damages the print
cartridge.
Storage tips
● When you remove print cartridges from the printer, store them in an airtight plastic
container.
● Make sure that the ink nozzles are face down but are not in contact with the
container.
Print cartridge protector
If you have purchased an HP photo print cartridge, you can store it in the protector that
comes with the print cartridge.
To insert the print cartridge into the print cartridge protector
➔ Slide the print cartridge at a slight angle into the protector, and snap it securely in
place.
To remove the print cartridge from the print cartridge protector
1.
Press down and back on the top of the protector to release the print cartridge.
2. Slide the print cartridge out of the protector.
Caution Do not drop the print cartridge. Dropping the print cartridge can
damage it.
HP Photosmart Software Help 65