Operations, Power up the server, Power down the server – HP ProLiant ML370 G5 Server User Manual

Page 20: Access the hp systems insight display

Operations 20

Operations

Power up the server

To power up the server, press the Power On/Standby button.

Power down the server

WARNING:

To reduce the risk of personal injury, electric shock, or damage to the equipment,

remove the power cord to remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the power supply and some

internal circuitry remain active until AC power is removed.

IMPORTANT:

If installing a hot-plug device, it is not necessary to power down the server.

Shut down the OS as directed by the OS documentation.

Press the Power On/Standby button to place the server in standby mode. When the server enters
standby power mode, the system power LED changes to amber.

Disconnect the power cords.

The system is now without power.

Access the HP Systems Insight Display

Press the HP Systems Insight Display ejector button to extend and open the HP Systems Insight Display.