HP ProLiant ML370 G5 Server - Manual (Page 14)

Component identification 14
Item Description
16 Power connector
17 Fan control/HP Systems Insight Display connector
18 USB tape drive connector
19 IDE connector
20 Processor 2
21 PPM 2
22 Power connector
23 Front video connector
24 Internal USB connector
25 Serial 2 connector
26 Parallel connector
27 Diskette drive connector
System maintenance switch
Position Default Function
S1 Off Off = iLO 2 security is enabled.
On = iLO 2 security is disabled.
S2 Off Off = System configuration can be modified.
On = System configuration is locked and cannot be modified.
S3 Off Reserved
S4 Off Reserved
S5 Off Off = Power-on password is enabled.
On = Power-on password is disabled.
S6 Off Off = Normal
On = ROM treats system configuration as invalid.
S7 Off Reserved
S8 Off Reserved
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase
all system configuration settings from both CMOS and NVRAM.
CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
properly configure the server or data loss could occur.
Internal system health LED combinations
When the internal system health LED on the front panel (" Front panel LEDs and buttons " on page 8 )
illuminates either amber or red, the server is experiencing a health event. Combinations of illuminated HP
Systems Insight Display LEDs and the internal health LED indicate system status.