HP Smart Array P800 Controller - Manual (Page 17)

Configuring an array 17
Supported procedures ACU ORCA
Assignment of RAID level + +
Sharing of spare drives among several arrays + --
Assignment of multiple spare drives per array + --
Setting of stripe size + --
Migration of RAID level or stripe size + --
Configuration of controller settings + --
Expansion of an array + --
Creation of multiple logical drives per array + --
Using ORCA
1. Power up the server.
POST runs, and any array controllers that are in the server are initialized one at a time. During each
controller initialization process, POST halts for several seconds while an ORCA prompt message
appears.
2. At the ORCA prompt, do one of the following:
o If you are connected using a headless console, press the Esc+8 key combination.
o In all other situations, press the F8 key.
The ORCA main menu appears, enabling you to create, view, or delete a logical drive.
To create a logical drive using ORCA:
1. Select Create Logical Drive.