HP LP3065c 30 inch LCD Monitor - Manual (Page 29)

Altitude:
Operating
Storage
0 to 12,000 feet
0 to 40,000 feet
0 to 3657.6 m
0 to 12192 m
Power Consumption (maximum) <176 watts
Input Terminal Three DVI-D connectors
with two DVI-D cables
included.
Energy Saver Feature
When the monitor is in its normal operating mode, the monitor uses <176 watts of power and the Power
light is green.
The monitor also supports a reduced power state. The reduced power state will be entered into if the
monitor detects the absence of the signal. Upon detecting the absence of the signal, the monitor screen
is blanked, the backlight is turned off, and the power light is turned amber. When the monitor is in the
reduced power state, the monitor will utilize less than 2 watts of power. There is a brief warm up period
before the monitor will return to its normal operating mode.
Refer to your computer manual for instructions on setting energy saver features (sometimes called
power management features).
NOTE The above power saver feature only works when connected to computers that have
energy saver features.
By selecting the settings in the monitor's Energy Saver utility, you can also program the monitor to enter
into the reduced poser state at a predetermined time. When the monitor's Energy Saver utility causes
the monitor to enter the reduced power state, the power light blinks amber.
Table B-1 LP3065 Specifications (continued)
ENWW Energy Saver Feature 23