HP LP3065c 30 inch LCD Monitor - Manual (Page 24)

NOTE The monitor does not support an On-Screen Display (OSD) menu.
HP Display LiteSaver
HP Display LiteSaver is a software application, available on the CD, that increases monitor life and
saves energy. It allows you to place your monitor into its low power sleep mode at predefined times by
shutting down or reducing power to most internal circuits. This helps protect the LCD panel against
image retention. Image retention can occur when the monitor is left on while displaying the same image
for an extended period of time, leaving a shadow of the image on the screen.
Installing the HP Display LiteSaver Software
1. Insert the CD in the computer CD-ROM Drive. The CD menu displays.
2. Select Install HP Display LiteSaver Software.
3. After installing the software, click the HP Display LiteSaver icon in the Windows system tray or
right-click the icon and select Configure... from the pop-up menu.
4. Select the following options to configure the HP Display LiteSaver features:
Table 4-2 HP Display LiteSaver Configuration Options
Select This Option To Do This
Enable Display LiteSaver Enables the HP Display LiteSaver functions; deselect to disable the HP Display LiteSaver.
Display Off Sets the time when the monitor automatically turns off. This does not affect screen saver
operation, which has priority over the HP Display LiteSaver.
Display On Sets the time when the monitor automatically turns on. This does not affect screen saver
operation, which has priority over the HP Display LiteSaver.
Activity Extension Sets the time in minutes before the monitor turns off if there is any keyboard or mouse activity
after the Display Off time is reached. If the keyboard or mouse is used, then HP Display LiteSaver
waits until the set amount of time before turning the display off again. Set to 0 to disable. If
18 Chapter 4 Operating the Monitor ENWW