HP LP3065c 30 inch LCD Monitor - Manual (Page 23)

Installing from the CD
To install the .INF and .ICM files on the computer from the CD:
1. Insert the CD in the computer CD-ROM drive. The CD menu displays.
2. View the “Monitor Driver Software Readme” file.
3. Select “Install Monitor Driver Software.”
4. Follow the on-screen instructions.
5. After the software has been installed, restart Windows.
6. Ensure that the proper resolution and refresh rates appear in the Windows Display control panel.
NOTE You may need to install the digitally signed monitor .INF and .ICM files manually from
the CD in the event of an installation error. Refer to the Monitor Driver Software Readme file on
the CD.
Downloading from the Worldwide Web
To download the latest version of .INF and .ICM files from the HP monitors support Web site:
1. Refer to http://www.hp.com/support and select your country region.
2. Follow the links for your monitor to the support page and download page.
3. Ensure your system meets the requirements.
4. Download the software by following the instructions.
Front Panel Controls
Table 4-1 Monitor Front Panel Controls
Control Function
1 Input Selects the video input (DVI-D #1, DVI-D #2, or DVI-D #3)
2 – (Minus) Reduces the brightness setting.
3 + (Plus) Increases the brightness setting.
4 Power LED Sleep mode — amber
Flashing green — non-supported video mode and when the brightness is being adjusted and the upper
or lower limit has been reached
Steady green — when monitor is displaying a supported mode (LED automatically turns off after 30
seconds)
5 Power Turns the monitor on or off.
ENWW Front Panel Controls 17