HP OmniBook 4100 Notebook PC - Manual (Page 9)

Using OmniBook Plug-In Modules
9WMRK XLI *PSTT] HMWO HVMZI
1-9
Using the Floppy disk drive
You can install the floppy disk drive in the plug-in module bay or attach it externally
to the parallel port.
This section describes how to
♦ Connect the floppy disk drive externally.
♦ Insert or eject a floppy disk.
To connect the floppy disk drive externally
If you want to use the floppy disk drive while also using any other OmniBook plug-in
module, you can use the external floppy disk drive cable (optional accessory
F1473A) to connect the floppy disk drive module to the OmniBook via the parallel
port.
1. Connect the floppy cable to the floppy disk drive module and tighten the
knurled thumbscrews.
2. Connect the other end of the floppy disk drive cable to the OmniBook parallel
port, as shown below.