HP OneView for Microsoft System Center - Manual (Page 5)

2 Support matrix
Supported System Center products and target operating systems
The kit can be installed on the following versions of SCVMM and can deploy the following operating
systems:
SCVMM 2012 R2 SCVMM 2012 SP1 Host OS \ SCVMM
Windows Server 2008 R2 SP1
2
Windows Server 2008 R2 SP1
2
Windows Server 2012
Windows Server 2012 Windows Server 2012
Windows Server 2012 R2
1
Windows Server 2008 R2 SP1
2
Not supported Windows Server 2012 R2
Windows Server 2012
Windows Server 2012 R2
Restrictions:
•
Must be a management server with the console installed in order to access the PowerShell
cmdlets.
•
In a high-availability configuration, must be the primary node.
• 1
Some drivers will fail to be injected into the boot image. Refer to the Troubleshooting section.
• 2
When deploying Windows Server 2008 R2 to UEFI servers, UEFI Optimized Boot must be
disabled and Secure Boot must be disabled.
Supported target servers
The following servers can be deployed and maintained:
DL560 Gen8 DL360e Gen8 BL660c Gen8 BL420c Gen8
DL580 G7 DL360p Gen8 BL680c G7 BL460c G7
DL580 Gen8 NEW DL380 G7 BL685c G7 BL460c Gen8
DL585 G7 DL380e Gen8 DL160 Gen8 BL465c G7
ML350e Gen8 V2 NEW DL380p Gen8 DL320e Gen8 BL465c Gen8
DL385 G7 DL320e Gen8 V2 BL490c G7
DL385p Gen8 DL360 G7 BL620c G7
Restrictions:
•
Hardware configuration is not supported.
•
Performing a correct deployment to servers with multiple storage controllers or multiple disks
available (either multiple DAS or SAN attach) is not supported by default.
•
Performing a PXE-based deployment through the HP NC540-series and NC530SFP+ network
adapter is not supported.
Supported System Center products and target operating systems 5