HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 15)

Command line 15
Item Description
PXE
Enables or disables PXE on a connection. Valid values are enabled,
disabled, and UseBios. Applies to Ethernet network connections only.
PXE can be enabled on one connection per profile.
Examples:
->set enet-connection MyProfile 2
NetworkName=NewNetworkName
Changes the network of an Ethernet connection
->set enet-connection RedProfile 1 NetworkName=""
Sets a network connection to "unassigned"
->set enet-connection GreenProfile 3 PXE=disabled
Disables PXE on an Ethernet connection
external-manager
Manage external manager settings and information.
Supported actions:
delete, help, set, show
Item Description
show external-
manager
Display the information of an existing external manager
Syntax show external-manager
Examples:
->show external-manager
Displays the information of an existing external manager.
->show external-manager
Displays the information of an existing external manager in the specified output
format.
->show external-manager
Displays the information of an existing external manager in the specified output
format.
Item Description
remove external-
manager Remove an existing manager and regain control of the VC Manager
Syntax remove external-manager UserName=
Properties:
UserName A valid external manager user name
Example
->remove external-manager UserName=
Removes external management control of the VC Manager
Item Description
set external-
manager Modify external manager configuration properties
Syntax
set external-manager UserName=
Enabled=