HP x22LED 21.5 inch Diagonal LCD Monitor - Manual (Page 24)

ENWW
18
B. Technical Specifications
All specifications represent the typical specifications provided by HP's component
manufacturers; actual performance may vary either higher or lower.
HP LCD Monitors
Face treatment: Glare polarizer with hard coating
Input terminal:
VGA connector
DVI-D 24-pin D-type connector
Table B-1 Model x20LED
Specifications:
Display Type: TFT LCD active matrix
Viewable Image Size 50.8 cm (20 in.) diagonal
Tilt -4 ° (+/-2)~+13° (+/-2)
Maximum Weight (unpacked) 2.7 kg(5.6 lbs)
Dimensions (h x w x d) 491.8 mm x 356.6 mm x 165.9 mm
19.3 x 14.0 x 6.5 in
Maximum Graphics Resolution 1600 x 900 @ 60 Hz
Optimum Graphics Resolution 1600 x 900 @ 60 Hz
Text Mode 720x400
Dot Pitch 0.2768 x 0.2768 mm/0.01 x 0.01 in
Horizontal Frequency (analog mode) 24 to 85 kHz
Vertical Frequency (analog mode) 50 to 76 Hz
Environmental Requirements
Temperature (independent of altitude)
Operating Temperature 41 ° to 104° F (5° to 40° C)
Non-Operating Temperature -4 ° to 140° F (-20° to 60° C)
Relative Humidity (non-condensing)
Operating Humidity 15% to 90%
Non-Operating Humidity 15% to 90%
Power Source 100-240V~, 50/60 Hz
Power Consumption 30 watts (W)
Sleep Power Consumption <1.0 watts (W)