Ink-backup mode, Ink-backup mode output exit ink-backup mode, Ink-backup – HP Deskjet D2560 Printer User Manual
Page 19: Mode
•
Printer documentation: For a list of print cartridge selection numbers, see the
reference guide that came with the printer.
•
Print Cartridge Ordering Information dialog box: For a list of print cartridge selection
numbers, open the
, click the Estimated Ink Levels tab, and then
click the Print Cartridge Information button.
The printer can operate in ink-backup mode. For more information, see
For information about installing a replacement print cartridge, see
Ink-backup mode
In the ink-backup mode, the printer operates with only one print cartridge. The ink-backup
mode is initiated when a print cartridge is removed from the print cartridge carriage.
NOTE:
When the printer operates in ink-backup mode, a message is displayed on
screen. If the message is displayed and two print cartridges are installed in the printer,
verify that the protective piece of plastic tape has been removed from each print
cartridge. When plastic tape covers the print cartridge contacts, the printer cannot
detect that the print cartridge is installed.
To remove plastic tape from a print cartridge
▲ Hold the print cartridge so that the copper strips are on the bottom and facing toward
the printer, and then carefully remove the plastic tape.
1 Remove plastic tape
CAUTION:
Do not touch the print cartridge ink nozzles or copper contacts.
Touching these parts will result in clogs, ink failure, and bad electrical connections.
Do not remove the copper strips. They are required electrical contacts.
For more information about ink-backup mode, see the following topics:
•
•
Chapter 3
16
Get started
Ge
t st
ar
te
d