HP EliteBook Revolve 810 G2 Tablet - Manual (Page 55)

Replacing or upgrading the hard drive
CAUTION: To prevent information loss or an unresponsive system:
Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the
hard drive while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
Removing the hard drive
To remove a hard drive:
1. Save your work and shut down the computer.
2. Disconnect AC power and external devices connected to the computer.
3. Turn the computer upside down on a flat surface.
4. Remove the battery and the battery cover. (Refer to Replacing a user-replaceable battery (select
models only) on page 33 .)
5. Remove the service bay cover. (Refer to Removing or replacing the service door on page 45 .)
6. Loosen the 1 hard drive screw. Pivot the hard drive to a forty-five degree angle, and then lift it
from the hard drive bay. The hard drive is a mini card SSD, which does not resemble
conventional hard drives.
Replacing or upgrading the hard drive 47