Binding margin is in the wrong place, Dimensions when attached to printer, Duplexing specifications – HP Deskjet 6840 Color Inkjet Printer User Manual

Page 162

Paper size changes when the two-sided printing option is selected

The paper size is not supported by the

Binding margin is in the wrong place

You might have chosen an incorrect paper orientation.

1. Open the

dialog box.

2. Select the Two-Sided Printing panel.
3. Verify that the correct binding has been selected:

• The Book button is selected for binding along the side.
• The Tablet button is selected for binding along the top.

Only one side of the page prints when the two-sided printing option is

enabled

Verify the following:

• The

are set in both the printer software and the application

you are using.

• The photo paper is not curled, if you are printing on two-sided photo paper.

Photo paper should be flat before printing. See

for more information.

• The paper size selected in the

duplexer.

• The paper type selected in the Paper Type/Quality panel is supported by the

duplexer.
See the documentation that came with the duplexer for a list of supported paper

types and sizes.

12.3.6 Auto Two-Sided Print Accessory with Small Paper Tray

specifications

Dimensions when attached to printer

219.3 mm (8.63 in) tall x 320.5 mm (12.62 in) wide x 142.1 mm (5.6 in) deep

Duplexing specifications

For duplexing specifications, including skew, media weight, and media sizes for

paper fed into the printer through the printer In tray, see the

HP Deskjet 6800 series printer User's Guide

162