HP StorageWorks 2.32 Edge Switch - Manual (Page 225)

HA-Fabric Manager user guide 225
D Configuring remote workstations
This appendix describes the procedures for installing the HAFM application on a remote
workstation. To run HAFM on a remote workstation, you must first download and install the HAFM
application from the HAFM appliance.
The following sections are described in this chapter:
• Windows systems , page 225
• Solaris systems , page 229
• HP-UX, AIX, and Linux systems , page 231
Windows systems
This section describes the procedures for installing HAFM on a remote workstation running
Windows 2000, Windows NT, or Windows XP.
Requirements
The download and installation process requires the use of a personal computer (PC) with the
following minimum system requirements:
• Operating system (one of the following):
• Windows 2000 Professional (with service pack 3)
• Windows NT 4.0 (with service pack 6a)
• Windows XP (with service pack 1a)
• 1 GHz Pentium III processor
• 512 MB RAM
• 350 MB available disk space
• Video card supporting 256 colors at 800 x 600 resolution
• Ethernet network adapter
• Java-enabled Internet browser, such as Microsoft Internet Explorer (version 4.0 or later) or
Netscape Navigator (version 4.6 or later)
Newer versions of HAFM or Element Managers installed on the HAFM appliance are automatically
downloaded when the remote client logs in to the appliance.
Installation procedure
To install HAFM on a remote workstation:
1. Obtain the HAFM appliance address from your network administrator.
2. Open a World Wide Web (WWW) browser.
3. Enter the HAFM appliance address in the Location (or Address) box on the browser, and then
press Enter.