HP StorageWorks 2.32 Edge Switch - Manual (Page 231)

HA-Fabric Manager user guide 231
17. If desired, select the Start the High Availability Fabric Manager check box to
immediately open HAFM.
18. Click Done to close the Install Complete dialog box.
Running HAFM
Run the HAFM program from the directory in which you saved it (the default is a subdirectory
named
HAFM
in your home directory).
1. In the Terminal window, enter
cd HAFM
.
2. Press Enter.
3. Enter
HAFM_Manager
.
4. Press Enter.
The HAFM application opens.
HP-UX, AIX, and Linux systems
This section describes the procedures for installing the HAFM on a remote HP-UX, AIX, or Linux
workstation.
Requirements
The download and installation process requires the use of a PC with the following minimum system
requirements:
• Operating system (one of the following):
• HP-UX 11.0a
• AIX minimum version 4.3.3
• Red Hat 7.3
• Processor:
• 400 MHz HA PA-RISC
• 333 MHz Power3-II
• 1 GHz Intel Pentium III
• 512 MB RAM
• 350 MB disk space
• Video card supporting 256 colors at 800 x 600 resolution
• Ethernet network adapter
• Java-enabled Internet browser, such as Microsoft Internet Explorer (version 4.0 or later) or
Netscape Navigator (version 4.6 or later)
Newer versions of HAFM or Element Managers installed on the HAFM appliance are automatically
downloaded when the remote clients log in to the HAFM appliance.
Installation procedure
1. Open a Terminal window by choosing Terminal from the Personal Applications subpanel.
2. At the prompt (#), enter
netscape
and then press Enter.