HP StorageWorks 2.32 Edge Switch - Manual (Page 229)

HA-Fabric Manager user guide 229
The progress of the installation is tracked on the Installing HP StorageWorks HAFM screen.
When the installation is complete, the Install Complete dialog box appears.
21. Click Done to close the Install Complete dialog box.
Running HAFM
• If you selected icons to be created in step 18 of the installation procedure, access the icon in the
windows Start menu or desktop to run HAFM.
• If you did not create any icons in step 18 of the installation procedure:
a. Access the HAFM folder (default location:
/bin/)
.
b. Double-click the file
HAFM_c.bat
to run HAFM.
Solaris systems
This section describes the procedures for installing HAFM on a remote Solaris workstation.
Requirements
The download and installation process requires the use of a workstation with the following minimum
system requirements:
• Solaris version 7.0
• UltraSPARC-IIi processor
• 512 MB RAM
• 350 MB available disk space
• Video card supporting 256 colors at 800 x 600 resolution
• Network connection
• Internet browser, such as Microsoft Internet Explorer (version 4.0 or later) or Netscape Navigator
(version 4.6 or later)
Newer versions of HAFM or Element Managers installed on the HAFM appliance are automatically
downloaded when the remote client logs in to the appliance.
Installation procedure
To install HAFM on a remote workstation:
1. Obtain the HAFM appliance address from your network administrator.
2. Open a World Wide Web (WWW) browser.
3. Enter the HAFM appliance address in the Location (or Address) box of the browser, and then
press Enter.
The HP StorageWorks HAFM page appears.
4. Click Begin Solaris Installation to begin the installation process.
5. If you have read the security agreement information and wish to continue, click Yes.
The HP High Availability Fabric Manager Available Installers page appears (
Figure 101 ).
6. Click Download. The File Download dialog box appears ( Figure 102 ).