HP Deskjet 5943 Photo Printer User Manual
Page 68
●
Verify that the protective piece of plastic tape has been removed from the print
cartridges.
1 Remove plastic tape
●
Consider selecting a higher
.
Blank pages print
●
The protective piece of plastic tape might still be attached to the print cartridges.
Verify that the plastic tape has been removed from the print cartridges.
1 Remove plastic tape
●
. Replace one or both empty print
cartridges.
●
The printer might be in direct sunlight. Direct sunlight can adversely affect the
. Move the printer out of direct sunlight.
●
You might be trying to print a borderless document with only the black print
cartridge installed. When printing a borderless document, always have the tri-
color print cartridge and a black or photo print cartridge installed.
Too much or too little ink appears on the page
If too much or too little ink appears on the page,
.
Too much or too little ink appears on the page
Follow these steps to adjust the ink density:
1.
Open the
dialog box, and then select the Color pane.
2.
Select the Paper Type/Quality pane.
3.
Click the Ink tab.
4.
Move the Ink Density slider toward Light or Heavy.
Chapter 11
66
HP Deskjet 5900 series