HP Deskjet 1280 Printer series - Manual (Page 44)

5-13 ENWW
Printing a sample page
Printing a sample page without being connected to a computer verifies whether your printer is
set up correctly.
1 Turn the printer off, wait a few seconds, and then turn it on again by pressing the
Power button.
2 Press and hold the Resume button and release it when the Resume light starts to blink.
Your printer prints a sample page.
Printing a diagnostic page
This page is useful to HP Technical Support if you have a printer problem.
1 Turn the printer on.
2 While holding down the printer’s Power button, press the printer’s Resume button four
times and then release the Power button.
3 The printer should print a diagnostic page. If the printer fails to print the diagnostic page,
there is something wrong with the printer. Contact the HP Customer Care Center (see
“Customer Support” ).
Cancelling a print job
You can cancel a print job in two ways:
Press the Cancel button on the front panel of the printer. The print job stops immediately.
-Or-
It is also possible to cancel print jobs in the print queue. See the Windows or Macintosh
online help for more information.
Pressing the Cancel button clears the job currently being processed by the printer. It does not
affect jobs waiting to be processed.