HP Pavilion zt3017WM Notebook PC - Manual (Page 18)

BTW User’s Guide
WIDCOMMinc 14
3.5.6 Dial-up Networking
Overview
The Bluetooth Dial-up Networking application allows this computer to use a modem that
is physically connected to a remote device to access the Internet or log on to a remote
network.
Open a connection to the Dial-up Networking service that is provided by another
Bluetooth device using one of these techniques:
•
•
•
•
•
•
•
•
Windows system tray, Bluetooth icon
From My Bluetooth Places
Using the Bluetooth Setup Wizard
After the Bluetooth dial-up networking connection is established, it can be used the same
way as any other networking connection. For example, you can open a browser and
explore the World Wide Web, if the remote computer has Internet access.
Close a Dial-up Networking connection
If the connection was established via the Bluetooth icon in the Windows system
tray: right-click the Bluetooth icon, select Quick Connect, Dial-up Networking
and then select the device that is providing the service (active connections have a
checkmark in front of them).
or
No matter how the connection was created: In My Bluetooth Places, right-click
the service name and select Disconnect.
Configure
The Bluetooth Configuration Panel > Client Applications > Dial-up Networking >
General tab provides options to configure:
The application name—To change it, highlight the existing name and enter the
new name.
Enable or disable secure connection—To enable secure connection, place a
checkmark in the box.
The Bluetooth virtual device to be used.
NOTE: Unless you have a specific reason to do so, DO NOT CHANGE the default
Bluetooth device or alter the device’s configuration.